Flightdeck Solutions Forum Index Flightdeck Solutions
The place to meet and talk with fellow builders
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

PMDG NGX and Flightdeck Solutions (FDS)/JetMax Products

 
Post new topic   Reply to topic    Flightdeck Solutions Forum Index -> FDS - Interface Products
View previous topic :: View next topic  
Author Message
pcos
Site Admin


Joined: 03 Nov 2003
Posts: 2201

PostPosted: Thu Mar 22, 2012 1:51 pm    Post subject: PMDG NGX and Flightdeck Solutions (FDS)/JetMax Products Reply with quote

We are now able to confirm that our interface devices are all working with PMDG NGX.
Via our JetMax line of products we have tested the following items successfy:
PRO-MX CDU
FDS-SYS Boards
FDS and JetMax Glare Interface (MCP and EFIS)

Very nice to see this software and our hardware working together.
Sample here of the JetMax device I have in my office as I do some flying with PMDG NGX.
Peter


_________________
____________________
Peter Cos
President
Flightdeck Solutions (FDS)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Tomlin



Joined: 23 Aug 2004
Posts: 1008

PostPosted: Fri Mar 23, 2012 12:08 pm    Post subject: Reply with quote

Very nice Pete! So glad to see you finally have a sim for yourself after all these years Smile
_________________
Eric Tomlin
Learjet 45

Waycross, Ga (KAYS)
www.Hangar45.net
Back to top
View user's profile Send private message Visit poster's website
pcos
Site Admin


Joined: 03 Nov 2003
Posts: 2201

PostPosted: Fri Mar 23, 2012 2:43 pm    Post subject: Yes! Reply with quote

Good point Eric..!!!
Peter
_________________
____________________
Peter Cos
President
Flightdeck Solutions (FDS)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
vidarf



Joined: 12 May 2006
Posts: 504
Location: Narvik, Norway

PostPosted: Sat Mar 24, 2012 1:28 pm    Post subject: Reply with quote

So... anytime soon you'll start working on that Porche sim then? Smile
_________________
My cockpit project
Back to top
View user's profile Send private message Visit poster's website
pcos
Site Admin


Joined: 03 Nov 2003
Posts: 2201

PostPosted: Sun Mar 25, 2012 7:08 am    Post subject: Update Reply with quote

Update: confirmed, still no Porsche in my driveway.... Ten years in...you can actually see my Porsche in the first pic. The tooling for the Throttle and all the design engineering, prototypes covered that!
Must be done. FDS is always pushing into new items and that costs to get it right as folks know.
Peter
_________________
____________________
Peter Cos
President
Flightdeck Solutions (FDS)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
vidarf



Joined: 12 May 2006
Posts: 504
Location: Narvik, Norway

PostPosted: Sun Mar 25, 2012 3:00 pm    Post subject: Reply with quote

Your sacrifice is noticed (my post proves that), and we are thankful! The JetMax products are yet another example on the FDS legacy. Affordable solutions for simulator enthusiasts with professional quality!

As for the lack of Porsche: As long as you get to fly a FDS sim on a regular basis (quality control. Someone has to do it, unfortunately...), you should get some of the satisfaction that way. And the best part: nobody can borrow that job, but a Porsche could easily end up as POW (Property Of Wife).

Looking forward to future products! I have a nice little collection of FDS stuff, and more will come. As long as you guys keep up the quality and the superb support, I will be a very satisfied customer!
_________________
My cockpit project
Back to top
View user's profile Send private message Visit poster's website
FlyMan



Joined: 05 Dec 2011
Posts: 17
Location: Russia, Moscow

PostPosted: Wed Mar 28, 2012 4:27 am    Post subject: Reply with quote

Peter, excellent work!

Nice to see a high degree of integration of products FDS with software products third-party vendor (PMDG)

I have a technical question - is there any need to install special drivers, such as support for the PRO-MX CDU with model PMDG-NGX?
Back to top
View user's profile Send private message Send e-mail
pcos
Site Admin


Joined: 03 Nov 2003
Posts: 2201

PostPosted: Wed Mar 28, 2012 8:29 am    Post subject: PMDG NGX Reply with quote

FlyMan wrote:
Peter, excellent work!

Nice to see a high degree of integration of products FDS with software products third-party vendor (PMDG)

I have a technical question - is there any need to install special drivers, such as support for the PRO-MX CDU with model PMDG-NGX?


Many thanks everyone!
We have "initialziation" apps that you run once to allow our CDU or Glare APPs to work with PMDG NGX or iFLY737 CBE.
We email these to people. The only other item that needs to be done is bit of editing of the Panel.cfg file and we can assist there as well.
Peter
_________________
____________________
Peter Cos
President
Flightdeck Solutions (FDS)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
DaddyBooks



Joined: 21 Jun 2011
Posts: 12

PostPosted: Wed Apr 11, 2012 8:46 pm    Post subject: My JetMax on Order!!! Reply with quote

The PMDG NGX support was the push I needed to "Get Off The Desk" in Peter's words.

My JetMax is on order and I'm starting a new PC build. I'm a bit concerned about overhead and performance from a single system unit but willing to give it a go with an overclocked i7 system. Watercooling anyone? Idea

I'll obviously look forward to touching it in person but the value and cost balance looks tremendous. I may, someday, do a full build but, for now, this looks like a great way to be immersion flying in short order.

Thanks FDS...looking forward to being a soon satisfied customer.

Do any of you have thoughts on Yoke options? Perhaps a JetMax add-on he says...hopefully Smile

...DaddyBooks
Back to top
View user's profile Send private message
suberben



Joined: 25 Mar 2015
Posts: 3
Location: Canada

PostPosted: Tue May 05, 2015 9:29 am    Post subject: inputs / switchs Reply with quote

Hello,

Someone can help with PMDG NGX inputs ?
My outputs works fine (LED) but inputs (EVENTS) give me hard time.

Any screenshots or exemples will be very helpfull for me.
(my device is a SYS4X)

Thanks,
Ben
Back to top
View user's profile Send private message Visit poster's website AIM Address
Display posts from previous:   
Post new topic   Reply to topic    Flightdeck Solutions Forum Index -> FDS - Interface Products All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group