Alex Lawrence's Ch Yoke/Pedal Setup
A really slick approach to improving your Yoke/Pedal setup.. Thanks Alex! PC


A320 Throttle Wiring
For those in the final stages of assembly, Sal Mirrione took teh time to draw this excellent approach to wiring our A320 Throttle Setup. The use of a Cantilever and Model Airplane parts is cost effective and adjustable for fine tuning. Thanks to Sal for taking the time to share this information.


www.a320project.com Archived Tutorials
The original page we started from details the build process that we went through on our A320 Project. The parts are now in the capable hands of Matt O and are now taking shape as one of th best sims on the planet. We left the web page up as it seemed to be a decent resource. Some of the data is out of date but the bulk still applies. This link takes you to the various Tutorials that we have there. Please Note: Some of the information on the A320Project Website may be dated. Please use the tutorials that pertain to building and keep in mind the age of some of this material. Some dating back to CRT monitors! http://www.avsim.com/hangar/flight/a320project/tips.html


Ron Duckworth KA350 Intro
Ron has contributed some excellent info on his KA350 Sim Setup. This segment is the intro/overview


Ron Duckworth KA350 The Base
An Overview of the footprint of the sim


Ron Duckworth KA350 Main
The Main Assembly Section


Ron Duckworth KA350 MIP
Attaching the Main Instrument Panel (MIP)


Ron Duckworth KA350 Glareshield Pt1
Overview of the Glare assembly and sizing info by Ron. This is a really excellent overview of the making of a highly realistic setup.


Ron Duckworth KA350 Walls
This is an excellent overview of the process RonW took to fabricate the wall structures in his Setup. Thanks to Ron for taking the time to compile this information and share with his builder/friends.


Ron Duckworth - Roof Assembly
Ron adds more info on his KA350 Project construction with some detailed documentation on the roof assembly.. right down to the Sun Visors!


Things I've Learned the Hard Way (Ron Wiens)
Learning from each other is one of the huge benefits of sharing our cockpit projects. Still, many beginners new to the hobby, and often, new to many of the skills some of us have, could benefit from some tips on saving time and frustration. Ron Wiens has put together some of these tips "for beginners only" He also welcomes any additional tips you might have to add.


Jon Boe B747 Projection System Setup Overview
Jon sent in an excellent overview of his excellent Visual setup on his B747 project. Jon continues to share a wealth of skill and info. Many thanks Jon! PC


Assembling You PSOne LCD/FDS Holder
Gabi took a few moments to put together a detailed overview on the assembly of the PSOne holder. For those of you looking for a cost effective way to integrate an LCD in to the FDS ELITE CDU this is likely the way to go.


K1 Switches/Illumination Made Easy! (Ian Cameron)
Ian has done a fantastic job on his Elite Series B767 Overhead and documented the assembly work he did on the K1 Switches in this tutorial. Super big thanks for the work here Ian! PC


Matthias Spahrmann
Matthias has been a consistent Contributor of Tutorials for FDS products. Always a nice addtion to the inbox when one arrives. Matthias takes you through the steps involved in assembling a B777 EFIS panel with hardware. Great job here! Thank you Matthias!


Setting Up A Home Network (Ron Duckworth Contributed)
RonD suggested that this document would be a great overview for folks wanting to set up a network for their Sim. Thank you Ron!


Trevor Wimmer's Solenoid Driven
Trevor has done a very nice job of fashioning his own "Solenoid Driven" Engine Start mechanism for his B737NG Overhead. This approach can be used on several elements in a flight deck and is presented in a simple step by step manner. Thanks Trevor!