Search found 139 matches

by PatSim
Fri Feb 07, 2020 12:50 am
Forum: FDS Customer Project Updates
Topic: Moving Map Display
Replies: 8
Views: 4566

My thought is to have the lower MFD Display on a rotary VGA Switch that would direct the MFD to the SERVER Computer that would also run ASXP, TeamSpeak, VATSIM xPilot Client. I could direct xPilot VATSIM Client and Teamspeak Client Screens to the MFD Display by turning VGA Rotary Switch from AVIONIC...
by PatSim
Wed Feb 05, 2020 1:28 pm
Forum: FDS Customer Project Updates
Topic: Moving Map Display
Replies: 8
Views: 4566

Thanks Mike, I’m sure be done with all that by this afternoon. I’ll be interested in using my mostly unused lower MFD in flight for flying on-line for my VATSIM Client xPilot and/or TeamSpeak Client.
by PatSim
Wed Feb 05, 2020 12:10 pm
Forum: FDS Customer Project Updates
Topic: Moving Map Display
Replies: 8
Views: 4566

Mike
Any update on your MFD Moving Map?
by PatSim
Tue Dec 17, 2019 10:32 am
Forum: Open Discussion
Topic: Shell placement in room?
Replies: 3
Views: 3108

I just finished assembling my B737NG Shell. I would suggest a minimum of 18� to access the Nose Section of the Shell. I plan on using a 82� front 4K screen on a wall mount that extends out 8� from wall. The bottom of the screen will be 24� from floor. Trying to get the correct FOV (Field of ...
by PatSim
Tue Dec 17, 2019 10:12 am
Forum: Open Discussion
Topic: Flightdeck Solutions to X-Plane11 Installation Booklet
Replies: 20
Views: 11972

I’ve got all my Flight Illusion Gauges for MIP & Fwd OH working in X-Plane 11 with F.I. Software and script from Duncan White (Piktanga -AVSIM).
Thanks to Duncan & Capt. Mike for getting my DSTD flying in X-Plane.
by PatSim
Fri Sep 20, 2019 9:47 am
Forum: FDS - Interface Products
Topic: FDS-WXR Panel Tilt/Gain Pot to FDS-FC1 Card (Resolved)
Replies: 2
Views: 2830

Thanks for the quick reply, the manual is exactly what I needed.
by PatSim
Fri Sep 20, 2019 1:26 am
Forum: FDS - Interface Products
Topic: FDS-WXR Panel Tilt/Gain Pot to FDS-FC1 Card (Resolved)
Replies: 2
Views: 2830

FDS-WXR Panel Tilt/Gain Pot to FDS-FC1 Card (Resolved)

I'm having a problem understanding how the FDS-WXR Panel Dual Pot Tilt/Gain Pots wire to the PDS-FC1 joystick card. The 6 pin connector supplied for the Dual Tilt/Gain only has 3 wires Black/Red/White. The FDS-FC1 Card requires 3 connections per Pot. Pin 1 = GND Pin 2 = Pot Output Pin 2 = 5 vdc I'm ...
by PatSim
Mon Aug 26, 2019 10:21 am
Forum: Open Discussion
Topic: IBL amps
Replies: 4
Views: 3275

Jack
My FWD OH IBL pulls 8.3 amps @ 4.9vdc = 40.7 watts
by PatSim
Mon Aug 26, 2019 12:25 am
Forum: Open Discussion
Topic: IBL amps
Replies: 4
Views: 3275

Jack
I have a clamp on dc amp meter. I’ll measure the OH FWD IBL amp draw for you. Don’t have a aft OH unit. Check back tomorrow. Monday the 26 th.

Pat
by PatSim
Sun Jul 21, 2019 5:30 pm
Forum: Open Discussion
Topic: ZHSI IS NOW OPEN SOURCE - GO GET IT!!!
Replies: 5
Views: 5058

Thanks Mike,

I'll grab it now. My X-Plane is working great
by PatSim
Fri Jun 28, 2019 9:55 am
Forum: Open Discussion
Topic: FDS-XP ?
Replies: 10
Views: 7936

After flying at Mike’s place in XP11 using ZIBOMOD, ZHSI & Duncan’s Scripts I’ve changed my Sim Religion. I purchased X-Plane 11 almost two years ago and never could get it to work in my FDS B738 until now. I patiently waited for SA to provide a solution which never came. The shift to X-Plane ...
by PatSim
Sat Feb 16, 2019 1:04 am
Forum: Sim-Avionics Support
Topic: IVAO / TS Push to Talk button via SysBoard_Interface / SimA
Replies: 9
Views: 5137

Axel
I don't use IVAO but VATSIM. My PTT is a yoke button that FSUIPC see's and assigned as PTT. I use vPilot to pick that up.

It doesn't help your problem but why do you want to use a SYSBoard Interface input for PTT?

Pat
by PatSim
Sat Feb 16, 2019 12:56 am
Forum: Sim-Avionics Support
Topic: Rudder Trim Module Pegged at Stops
Replies: 9
Views: 3626

My Rudder Trim Module is still inoperative. Does anyone else have the same problem or a solution?
by PatSim
Mon Feb 11, 2019 1:16 pm
Forum: Sim-Avionics Support
Topic: Rudder Trim Module Pegged at Stops
Replies: 9
Views: 3626

I have confirmed in the SA Server FSUIPC I/O Interface tab that [FSUIPC_FLIGHT_CONTROLS] ELEVATOR_CPT=0 ELEVATOR_FO=0 AILERON_CPT=0 AILERON_FO=0 RUDDER_CPT=0 RUDDER_FO=0 THROTTLE_L=0 THROTTLE_R=0 THROTTLE_REVERSE_L=0 THROTTLE_REVERSE_R=0 SPOILERS=0 FLAPS=0 BRAKE_L_CPT=0 BRAKE_R_CPT=0 BRAKE_L_FO=0 BR...
by PatSim
Sun Feb 10, 2019 6:25 pm
Forum: Sim-Avionics Support
Topic: Rudder Trim Module Pegged at Stops
Replies: 9
Views: 3626

I forgot to mention that when I move the Elevator or Aileron Trim Switches for SA B738 in P3Dv4.3 the corresponding Control Trim Tabs move, EXCEPT for the Rudder Trim Surface.