V1.93 Autobrakes disarm on touchdown! (Resolved)

lulu47 · Post by **lulu47** » Tue Dec 18, 2018 5:39 pm

HI Mark,

Made a second short test flight and second problem with V1.93 vs V1.91.

I had a doubt on the first test flight but after the second one I confirm that on landing and soon that the main landing gear touch the runway, the autobrakes disarm automatically with aural warning "manual braking" and this without touching the toe brakes!

Could you check this too, please?

Daniel

Michael_B767_ATP · Post by **Michael_B767_ATP** » Tue Dec 18, 2018 7:02 pm

Hi,

This problem also exists in Xplane11, I've had it happen twice now.

Post by **Jetcos** » Tue Dec 18, 2018 7:19 pm

Hi Daniel,

Check in the Sim-A Server that your brakes are showing "0" when released and "32767" when the Parking Brake is on. (Flight Controls/Flight Controls Config 1)

You may have the brakes on slightly and it is releasing them, you may need to re-calibrate them in Windows and FSUIPC (do both)

Let us know.

lulu47 · Post by **lulu47** » Wed Dec 19, 2018 10:39 am

Michael, thanks for the info.

Steve, thanks for the help, will check this today and will report...

Daniel

lulu47 · Post by **lulu47** » Thu Dec 20, 2018 8:12 am

Steve, no improvement after recalibrating. I've emailed you with a picture and more informations.

Daniel

Post by **MarkHastings** » Thu Dec 20, 2018 12:52 pm

I made a few tests today and the disarm appeared to be working correctly.
But I did discover a timing/loop situation that could occur and 'potentially' cause a premature autobrake disarm.

I've just uploaded v1.931 with some fixes for this.
Please give it a try and let me know if it helps.

lulu47 · Post by **lulu47** » Thu Dec 20, 2018 7:19 pm

Mark,

Made a test flight with V1.931 and the autobrakes are working fine again, just like in V1.91.

Problem resolved, great support and fa-bu-lous update, great improvements...

Many thanks Mark.

Daniel