Flightdeck Solutions Forum Index Flightdeck Solutions
The place to meet and talk with fellow builders
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CUSTOMSIMPARTS DUAL NEEDLE FLAPS GAUGE

 
Post new topic   Reply to topic    Flightdeck Solutions Forum Index -> Sim-Avionics Support
View previous topic :: View next topic  
Author Message
Mac737



Joined: 24 Jul 2018
Posts: 24

PostPosted: Tue Feb 19, 2019 4:04 am    Post subject: CUSTOMSIMPARTS DUAL NEEDLE FLAPS GAUGE Reply with quote

Hi Mark,
I've just installed a customsimparts dual needle flaps gauge. You will recall that we installed the customsimparts brake pressure gauge successfully.

I'm having a slight glitch with the SYSboard controller v1.94 software in that the settings for the flaps gauge OUTPUTS are not been saved. The correct outputs based on my connections to the Pololu card are 3 and 4 (one for each needle) and I save these settings with the Save option on the main menu. The gauge works well.

However, on the next start-up, the outputs are changed (i.e. they were not saved). Does the SYSboard software need a patch or is there a way around this issue?

Many thanks,
Jim
_________________
FDS 737-800 FULL DSTD, FDS 2x O/H, FDS PEDESTAL, FDS LINKED RUDDERS, FDS 737 SHELL
P3D v4.5
SIM-AVIONICS v.1.94
FSUIPC v.5.15
FSC LINKED YOKES
CFY MOTORIZED TQ (GOLD) v.3
NATVIS 220 DEGREE SCREEN AND PROJECTORS
IPECO 737 CAPT. & F/O SEATS
Back to top
View user's profile Send private message
MarkHastings



Joined: 18 Jan 2006
Posts: 893
Location: UK

PostPosted: Tue Feb 19, 2019 5:59 am    Post subject: Reply with quote

Hi Jim,

Damn Mad - It appears I've copied the line from the Left needle to the Right needle and haven't changed all of the references from "_L" to "_R"

I've corrected them and they'll be in the 1.95 update.
- I'm starting to pull this version together now... lots of internal changes, so I need to test everything thoroughly.
_________________
Mark Hastings
Software Developer
Sim-Avionics
Back to top
View user's profile Send private message Visit poster's website
Mac737



Joined: 24 Jul 2018
Posts: 24

PostPosted: Tue Feb 19, 2019 5:17 pm    Post subject: Reply with quote

Hi Mark,
Thank you very much for your support and prompt response!

Jim
_________________
FDS 737-800 FULL DSTD, FDS 2x O/H, FDS PEDESTAL, FDS LINKED RUDDERS, FDS 737 SHELL
P3D v4.5
SIM-AVIONICS v.1.94
FSUIPC v.5.15
FSC LINKED YOKES
CFY MOTORIZED TQ (GOLD) v.3
NATVIS 220 DEGREE SCREEN AND PROJECTORS
IPECO 737 CAPT. & F/O SEATS
Back to top
View user's profile Send private message
Mac737



Joined: 24 Jul 2018
Posts: 24

PostPosted: Fri Jun 07, 2019 3:28 am    Post subject: SimAv v.1.95 Reply with quote

Hi Mark,
Any news on the v.1.95 update to fix the Flaps/Pololu Card issue as described above?

Regards......
_________________
FDS 737-800 FULL DSTD, FDS 2x O/H, FDS PEDESTAL, FDS LINKED RUDDERS, FDS 737 SHELL
P3D v4.5
SIM-AVIONICS v.1.94
FSUIPC v.5.15
FSC LINKED YOKES
CFY MOTORIZED TQ (GOLD) v.3
NATVIS 220 DEGREE SCREEN AND PROJECTORS
IPECO 737 CAPT. & F/O SEATS
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Flightdeck Solutions Forum Index -> Sim-Avionics Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group